YD-ERC30SA low noice Schraube Luftkompressor 30HP 22KW zu verkaufen
Basisinformation
Modell: YD-ERC30SA
Produktbeschreibung
High Efficiency Screw Rotor
Composed of two adjacent teeth tooth curve smooth transition at the connection point, the rotor contact line is short, triangular small leak, flow area, was streamlined, aerodynamic resistance, lower than the power, you can get a higher power. Larger interdental area utilization factor, make full use of the rotor teeth volume, long-necked than small, and enhance the rigidity of the rotor, streamlined design increases the intake and exhaust flow area orifice amount greater trochanter low speed, low noise and longer life. |
|
Imports filtration system:
|
|
Efficient Host
|
|
Full set of imported gas control system
|
|
Imported high-tech micro-controller
|
|
Humane man-machine interface control system
1 LCD display in English 2 remote machine next selection control 3 linkage selected independently run 4 has a start-stop control of the motor 5 reversal protection for the air compressor 6 for temperature detection and control and protection 7 detection and protection against voltage 8 RS-485 communication, support MODBUS RTU protocol 9 of the motor with phase, overload, unbalanced, high voltage, low voltage protection function 10 highly integrated, high-reliability, high cost |
|
A new generation of low efficiency motors specially
|
model | YD-ERC10SA | YD-ERC15SA | YD-ERC20SA | YD-ERC25SA | YD-ERC30SA | YD-ERC40SA | YD-ERC50SA | YD-ERC60SA | YD-ERC75SA | YD-ERC100SA | |
air delivery (m3/min/bar) |
1.1/7 | 1.8/7 | 2.4/7 | 3.1/7 | 3.8/7 | 5.3/7 | 6.6/7 | 8.0/7 | 10.5/7 | 13.6/7 | |
1.0/8 | 1.65/8 | 2.2/8 | 2.9/8 | 3.6/8 | 5.0/8 | 6.2/8 | 7.7/8 | 9.8/8 | 13.0/8 | ||
0.85/10 | 1.5/10 | 2.1/10 | 2.7/10 | 3.2/10 | 4.3/10 | 5.7/10 | 6.9/10 | 8.7/10 | 11.3/10 | ||
0.7/12.5 | 1.3/12.5 | 1.8/12.5 | 2.3/12.5 | 2.5/12.5 | 3.6/12.5 | 4.6/12.5 | 6.0/12.5 | 7.3/12.5 | 10.1/12.5 | ||
motor power (kw) |
7.5 | 11 | 15 | 18.5 | 22 | 30 | 37 | 45 | 55 | 75 | |
cooling style | air-cooling | ||||||||||
drive style | belt drive | ||||||||||
ambient temperature (°C) |
-5 ~ +45 | ||||||||||
discharge temperture (°C) |
≤ambient+15 | ||||||||||
noice db(A) |
72±5 | 72±5 | 68±2 | 72±2 | |||||||
power source (v/ph/Hz) |
220-460/3/50,60 | ||||||||||
size (mm) |
length | 850 | 1150 | 1150 | 1200 | 1200 | 1250 | 1350 | 1300 | 1950 | 1950 |
width | 640 | 700 | 700 | 805 | 850 | 1000 | 950 | 1000 | 1320 | 1320 | |
height | 880 | 1180 | 1180 | 1280 | 1280 | 1360 | 1600 | 1470 | 1570 | 1570 | |
weight (kg) |
350 | 450 | 460 | 620 | 620 | 9000 | 1060 | 1150 | 1750 | 1840 | |
Cooling air volume (m3/min) |
32.5 | 50 | 50 | 110 | 110 | 145 | 145 | 185 | 220 | 250 |
No. |
Name |
Country |
Company |
1 |
Electrical Original |
France |
Schneider |
2 |
Motor |
Sweden |
Qing Jiang Motor( SKF bearings from Sweden) |
3 |
Main machine |
Germany |
LOFTOLL /UT series |
4 |
Oil |
Sweden |
TOTAL(international brands) |
5 |
Filter elements for oil-gas seperator,air filter |
Germany |
LOFTOLL /UT series |
6 |
Oil filter elements |
Germany |
MANN |
7 |
Safety valve |
China |
YUE JIN/FU YU |
8 |
Pressure controller |
China |
Pulete |
9 |
Belt |
Germany |
OBIT |
10 |
Oil-gas barrels |
China |
Dongya/ Jiaxing / Jiangnan |
11 |
Intake valve |
China |
Hongxing |
12 |
Oil-gas cooler |
China |
LOFTOLL /UT series |
13 |
Fan |
China |
ShiYiBai/ Furama |
Produktgruppe : Schraubenkompressor
Premium Related Products